LEDdynamics creates direct LED replacements for fluorescent tubes
Aug, 2007 - LEDs Magazine
Replacing a fluorescent tube with an LED luminaire becomes very easy when you don't need to worry about drivers, ballasts and wiring, writes Tim Whitaker.
The EverLED TR from LEDdynamics (Randolph, Vermont) is billed as the first commercially available, direct "drop in" replacement for standard fluorescent lamps. The fitting is able to work directly with "almost all" of the wide range of fluorescent ballasts in use today, says Mason Alling, the company's sales and marketing manager, so there is no need to change the fitting or alter the wiring. "Most retrofit/replacement solutions require wiring around the ballast, which needs a qualified electrician," he says. "There is also the need to take down the power, with the resulting loss of productivity."
The secret lies in LEDdynamics' patent-pending driver technology. This is capable of drawing power from different ballasts and then supplying constant current to the LEDs. An automatic sensing system detects the type of ballast and supplies a constant current level that enables the LEDs to provide the same amount of light that would be produced by a fluorescent tube in the same housing.
Email this page to a friend
If you speak another language fluently and you liked this page, make
a contribution by translating
it! For additional translations check out FreeTranslation.com
(Voor vertaling van Engels tot Nederlands)
(For oversettelse fra Engelsk til Norsk)
(Для дополнительных переводов проверяют FreeTranslation.com )